Installation

1. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

(a) Install the lock nut onto the push rod.

(b) Install the push rod clevis.

(c) Tighten the lock nut and check the dimension A is same as the dimension A that has been measured.

2. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY

(a) Install the clutch master cylinder with the 2 nuts. Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)

3. CONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

(a) Using SST, connect the flexible hose tube. SST 09023-00101

4. INSTALL CLUTCH RESERVOIR TUBE

(a) Connect the clutch reservoir tube with the clip to the clutch master cylinder assembly.

5. INSTALL BRAKE BOOSTER ASSEMBLY

6. INSPECT AND ADJUST CLUTCH PEDAL SUBASSEMBLY (See page CL-3)

7. INSTALL INSTRUMENT PANEL UNDER COVER SUBASSEMBLY NO.1 (See page IR-82)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment