Installation

HINT:

The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

(a) Using an air riveter or hand riveter, install the front No. 1 speaker with 3 new strike rivets. HINT:

Install the new strike rivets in the order shown in the illustration.

NOTICE:

• Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

• Confirm that the rivets are seated properly against the speaker.

• Do not tilt the riveter when installing the rivet onto the speaker.

• Do not leave any space between the rivet head and speaker.

• Do not leave any space between the speaker and door. Firmly hold the 2 items together while installing the rivet.

(b) Connect the speaker connector.

2. INSTALL FRONT DOOR TRIM BOARD SUBASSEMBLY (See page ED-26)

3. INSTALL FRONT DOOR ARMREST BASE UPPER PANEL (See page ED-28)

4. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (See page ED-28)

5. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (See page ED-29)

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment