Installation

1. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY

(a) Engage the 2 claws and connect the air inlet damper control cable.

2. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY

(a) Engage the 2 claws and connect the defroster damper control cable.

3. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY

(a) Engage the 2 claws and connect the air mix control cable clamp.

(b) Connect the air mix damper control cable to the clamp.

4. INSTALL AIR CONDITIONING PANEL ASSEMBLY

(a) Connect the 3 connectors and the 4 clamps.

(b) Engage the 4 clips and 2 claws and install the air conditioning panel.

5. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY

(a) Engage the 4 clips and 2 claws and install the instrument cluster finish panel.

6. INSTALL RADIO RECEIVER ASSEMBLY

7. INSTALL INSTRUMENT CLUSTER FINISH PANEL (See page ME-140)

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See page ME-141)

9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (See page ME-141)

10. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER (See page ME-142)

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

AIR CONDITIONING - AIR CONDITIONING PANEL ASSEMBLY (for Hatchback)

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment