Problem Symptom Confirmation

(a) Inspect the SET function.

(1) Turn the cruise control main switch on.

(2) Drive at the required speed between 25 mph (40 km/h) and 125 mph (200 km/h).

(3) Push the cruise control main switch to -(COAST)/SET.

(4) After releasing the switch, check that the vehicle cruises at the set speed.

(b) Inspect the ACCELERATION function.

(1) Turn the cruise control main switch on.

(2) Drive at the required speed between 25 mph (40 km/h) and 125 mph (200 km/h).

(3) Push the cruise control main switch to -(COAST)/SET.

(4) Check that the vehicle speed increases while the cruise control main switch is pushed to + (ACCEL)/RES (RESUME), and that the vehicle cruises at the newly set speed when the switch is released.

(5) Push the cruise control main switch to + (ACCEL)/RES (RESUME) and then release it immediately. Check that the vehicle speed increases by approximately 1.0 mph (1.6 km/h) (tap-up control).

(1) Turn the cruise control main switch on.

(2) Drive at the required speed between 25 mph (40 km/h) and 125 mph (200 km/h).

(3) Push the cruise control main switch to -(COAST)/SET.

(4) Check that the vehicle speed decreases while the cruise control main switch is pushed to -(COAST)/SET, and the vehicle cruises at the newly set speed when the switch is released.

(5) Push the cruise control main switch to -(COAST)/SET, and then release it immediately. Check that the vehicle speed decreases by approximately 1.0 mph (1.6 km/h) (tap-down control).

(d) Inspect the CANCEL function.

(1) Turn the cruise control main switch on.

(2) Drive at the required speed between 25 mph (40 km/h) and 125 mph (200 km/h).

(3) Push the cruise control main switch to -(COAST)/SET.

(4) When performing any one of the following, check that the cruise control system is canceled and that the normal driving mode is reset.

• Depressing the brake pedal

• Depressing the clutch pedal (M/T only)

• The shift lever is moved from the D or 3rd position to any of the N, 2nd , or L positions (A/T only)

• Turning the cruise control main switch off

• Pulling the cruise control main switch to CANCEL

(e) Inspect the RES (RESUME) function.

(1) Turn the cruise control main switch on.

(2) Drive at the required speed between 25 mph (40 km/h) and 125 mph (200 km/h).

(3) Push the cruise control main switch to -(COAST)/SET.

(4) Cancel the cruise control system by performing any of the above operations (other than turning the main switch off).

(5) After pushing the cruise control main switch to + (ACCEL)/RES (RESUME) at a driving speed of more than 25 mph (40 km/h), check that the vehicle resumes the speed set prior to the cancellation.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment