Reassembly

1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

3. INSTALL PISTON SEAL

(a) Apply lithium soap base glycol grease to a new piston seal.

(b) Install the piston seal onto the disc brake cylinder. NOTICE:

Securely install the piston seal into the groove of the disc brake cylinder.

4. INSTALL FRONT DISC BRAKE PISTON

(a) Apply lithium soap base glycol grease to the piston and a new cylinder boot.

(b) Install the cylinder boot onto the piston.

(c) Install the piston into the disc brake cylinder. NOTICE:

Do not forcibly install the piston into the disc brake cylinder.

Soap Base Lithium Grease

5. INSTALL CYLINDER BOOT

(a) Install the cylinder boot into the disc brake cylinder. NOTICE:

Securely install the cylinder boot into the groove of the disc brake cylinder.

(b) Using a screwdriver, install a new set ring. NOTICE:

Do not damage the cylinder boot.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment