1. INSTALL RELEASE CYLINDER BLEEDER PLUG Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf)


(a) Install the bleeder plug cap onto the bleeder plug.

(b) Install a new spring onto the cylinder body.

(c) Coat the parts with lithium soap base glycol grease, as shown in the illustration.

(d) Install the piston onto the cylinder body. NOTICE:

Do not damage the inside of the cylinder body.

(e) Install the push rod onto the cylinder body.

(f) Install the boot onto the cylinder body.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment