Reconfirm

(b) Start the engine.

(c) Drive the vehicle at a speed of 12 mph (20 km/h) or more for at least 60 seconds.

(d) Check if the same DTC(s) is output (See page BC-25).

Result

Result

Proceed to

DTC not output

A

DTC output

Go to step 11

CHECK FRONT SPEED SENSOR INSTALLATION

(a) Check that the speed sensor installation bolt is tightened properly. OK:

The installation bolt is tightened properly. Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)

TIGHTEN BOLT PROPERLY

CHECK FRONT SPEED SENSOR

1

1

1

I

1

U

OK

NG

BR03795E09

(a) Visually check the speed sensor for deformation and damage. OK:

No deformation or damage.

No gap between the sensor and front steering knuckle.

REPLACE FRONT SPEED SENSOR

CHECK SPEED SENSOR TIP

(a) Remove the speed sensor (See page BC-95).

No scratches or foreign matter on the sensor tip.

CLEAN OR REPLACE SPEED SENSOR

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment