Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Hatchback) (See page IP-68)

3. REMOVE CONSOLE BOX ASSEMBLY REAR (for Hatchback) (See page IP-69)

4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER (for Sedan) (See page ME-138)

5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Sedan) (See page IP-84)

6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan) (See page IP-84)

7. REMOVE CONSOLE UPPER REAR PANEL SUBASSEMBLY (for Sedan) (See page IP-84)

8. REMOVE CONSOLE BOX CARPET (for Sedan) (See page IP-85)

9. REMOVE REAR CONSOLE BOX ASSEMBLY (for Sedan) (See page IP-85)

10. DISCONNECT OXYGEN SENSOR CONNECTOR

11. REMOVE EXHAUST PIPE ASSEMBLY FRONT (See page EX-5)

12. REMOVE FRONT FLOOR HEAT INSULATOR NO.1

(a) Remove the 2 bolts and nut and remove floor heat insulator No.1.

13. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Disconnect the control shift cable from the shift lever.

(b) Turn the lock to release it and separate the control shift cable from the shift lever retainer.

(c) Remove the clip and disconnect the control select cable from the shift lever.

(d) Turn the lock to release it and separate the control select cable from the shift lever retainer.

(e) Remove the 2 clips and the 2 washers, and disconnect the 2 cables from the transaxle.

(f) Remove the 2 clips and disconnect the 2 cables from the control cable bracket.

(g) Remove the 3 nuts and remove the transmission control cable.

2007 Toyota Yaris Power Lock Wiring
Protruding Portion —Lock
Yaris Transmission Shift Lever Damper
Protruding Portion Lock
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment