Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See page ME-145)

3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See page ME-145)

4. REMOVE INSTRUMENT CLUSTER FINISH PANEL (See page ME-145)

5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER

(a) Disengage the 2 claws and 4 clips and remove the instrument cluster finish panel center. NOTICE:

• Grip the rib portion of the instrument cluster finish panel center by hand to remove it.

• To avoid breakage of the instrument cluster finish panel center when removing it, do not apply excessive force to the register or pull out the rink or panel portions.

6. REMOVE AIR CONDITIONING PANEL ASSEMBLY

(a) Disengage the 3 clips and 2 claws and remove the air conditioning panel.

(b) Disconnect the 3 connectors and the clamp.

7. DISCONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY

(a) Disconnect the air mix control cable from the clamp.

(b) Disengage the 2 claws and disconnect the air mix damper control cable.

8. DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY

(a) Disengage the 2 claws and disconnect the defroster damper control cable.

9. DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY

(a) Disengage the 2 claws and disconnect the air inlet damper control cable.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment