Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL (See page ME-138)

3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See page ME-138)

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See page ME-138)

5. REMOVE INSTRUMENT CLUSTER FINISH PANEL (See page ME-139)

6. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (except Integrated with Panel) (See page IP-43)

7. REMOVE RADIO RECEIVER ASSEMBLY

(a) for Integrated with Panel:

(1) Disconnect the hazard warning signal switch connector.

2004 Dodge Ram Battery Terminals

(3) Disengage the 4 clips and the 4 claws and remove the radio receiver.

(4) Disconnect the plug.

(5) Disconnect the 3 radio connectors.

(b) except Integrated with Panel:

(1) Remove the 4 bolts and the radio receiver.

(2) Disconnect the plug.

(3) Disconnect the 2 radio connectors.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment