Toyota Rav4 2004 Indicator Removal

1. REMOVE FRONT WHEEL

2. DRAIN BRAKE FLUID NOTICE:

Immediately wash off any brake fluid that comes into contact with any painted surfaces.

3. DISCONNECT FRONT FLEXIBLE HOSE

(a) Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.

4. REMOVE DISC BRAKE CYLINDER ASSEMBLY

(a) Fix the slide pin with a spanner, remove the 2 bolts and remove the disc brake cylinder.

5. REMOVE FRONT DISC BRAKE PAD KIT (PAD ONLY)

(a) Remove the 2 disc brake pads from the disc brake cylinder mounting.

6. REMOVE FRONT ANTI SQUEAL SHIM KIT

(a) Remove the No. 1 anti squeal shim and No. 2 anti squeal shim from each brake pad.

7. REMOVE NO. 1 PAD WEAR INDICATOR PLATE

(a) Remove the indicator plate from each brake pad.

8. REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE

(a) Remove the 4 disc brake pad support plates from the disc brake cylinder mounting.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment