Removal

HINT:

• Use the same procedure for both the RH and LH sides.

• The procedure described below is for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (See page ED-9)

3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (See page ED-9)

4. REMOVE FRONT ARMREST BASE UPPER PANEL (See page ED-9)

5. REMOVE FRONT DOOR TRIM BOARD SUBASSEMBLY (See page ED-11)

6. REMOVE OUTER REAR VIEW MIRROR (See page MI-8)

7. REMOVE FRONT DOOR BELT MOULDING (See page ET-85)

8. REMOVE FRONT DOOR TRIM BRACKET (See page ED-12)

9. REMOVE FRONT DOOR SERVICE HOLE COVER (See page ED-12)

10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY (See page ED-12)

11. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY (See page ED-13)

12. REMOVE FRONT DOOR GLASS RUN (See page ED-14)

13. REMOVE FRONT DOOR FRAME SUB-ASSEMBLY REAR LOWER (See page ED-14)

14. REMOVE FRONT DOOR OUTSIDE HANDLE COVER (See page ED-15)

15. REMOVE FRONT DOOR LOCK

(a) Using "Torx" socket wrench T30, loosen the 3 screws.

NOTICE:

Do not drop or damage the front door lock when removing the screws.

(b) Move the front door lock downward, remove the outside handle frame link and remove the front door lock.

HINT:

Remove the front door lock through the service hole.

Unlock

Lock

Unlock

Lock

S

4

3

2

1

10

g

8

7

6

5

(d) Disconnect the front door lock remote control cable and the front door inside locking cable.

(e) Remove the door lock wire harness seal.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment