Remove Rear Brake Parking Brake Shoe Lever Subassembly

(a) Using a screwdriver, remove the C-washer and remove the parking brake shoe lever.

Toyota Rear Brake Shoe Assembly

4. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY

(a) Using SST, separate the brake tube from the rear wheel brake cylinder. SST 09023-00100 HINT:

Use a container to catch the brake fluid.

Sst 09023 00100

(b) Remove the bleeder plug cap.

(c) Remove the bleeder plug.

(d) Remove the bolt and remove the rear wheel brake cylinder.

Ho52 Parking Brake Shoe Lever

5. REMOVE REAR WHEEL CYLINDER KIT

(a) Remove the 2 wheel cylinder boots from the wheel brake cylinder.

(b) Remove the 2 pistons.

(c) Remove the compression spring.

(d) Remove the wheel cylinder cup from each piston.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment