Standard

Symbols (Terminal No.)

Wiring Color

Terminal Description

Condition

Specified Condition

+B (J13-5) - GND (J13-1)

L - W-B

Battery (power supply)

Always

11 to 14 V

GND (J 13-1) - Body ground

W-B - Body ground

Ground

Always

Below 1 Q

Standard voltage:

If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the door control receiver connector.

(d) Measure the voltage of the wire harness side connectors.

Symbols (Terminal No.)

Wiring Color

Terminal Description

Condition

Specified Condition

PRG (J13-3) - Body ground

W - Body ground

Door control receiver output

Transmitter switch ON ^ OFF (No key in ignition key cylinder, all doors closed)

6 to 7 V ^ Below 1 V ^ 6 to 7 V

RDA (J13-2) - Body ground

R - Body ground

Door control receiver input

Transmitter switch ON ^ OFF (No key in ignition key cylinder, all doors closed)

Below 1 V ^ 6 to 7 V ^ Below 1 V

CG SG CANH SIL

1

2

3

4

5

6

7

8

g

10

11

12

13

14

15

16

If the result is not as specified, there may be a malfunction in the wire harness.

DIAGNOSIS SYSTEM

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment